Search
 
 
Browse Categories
Browse by Manufacturer
Products

Kohler Command PRO 7HP Threaded 5/8" Shaft 208cc #CH270-3014

<< Previous in Kohler Horizontal Shaft Next in Kohler Horizontal Shaft >>

PRODUCT DETAIL
BNE PRICE: $279.00
Manufacturer: Kohler
Part Number: CH270-3014

free shipping
7hp Kohler Command Pro Engine
5/8" Threaded Pump shaft
OHV, dual ball bearing PTO, cast iron cylinder liner,
Recoil start, low oil device
Model CH270-3014.
43 lbs


Standard Features: 
• Overhead Valve Design • Electronic Ignition 
• Quad-CleanTM 4-Stage All-Season Heavy Duty Cyclonic Air Cleaner
• Dual Oil Fill Locations and Oil Drains 
• Cast Iron Cylinder Liner 
• 4.1 L Metal Tank w/Strainer 
• Fuel Shut-off Valve (Unless otherwise mentioned) 
• Stellite® Exhaust Valve 
• Engine Mounted Throttle and Choke Controls, Remote Throttle Ready 
• Oil SentryTM Switch Installed (No Light) 
• Dual Ball Bearings, PTO and Flywheel 
• Metal Blower Housing 
• Indexable Recoil Starter 
• Large Capacity Muffler w/Heat Shield and Spark Arrestor 
• Multi-language Owner’s 
• Color - Black with Cast Aluminum


Engine type

4-cycle, gasoline, OHV, cast iron cylinder liner, aluminum block

ModelCommand PRO CH270
HP (kW) 17(5.2)
Displacement (cc)12.7 (208)
Bore in (mm)2.8 (70)
Stroke in (mm)2.1 (54)
Gross Torque ft lbs (Nm) 110.5 (14.2)
Compression Ratio8.5:1
Dry Weight lbs (kg)38.7 (17.5)
Oil Capacity US qts (L)0.63 (0.6)
LubricationSplash
Dimensions LxWxH (in)*12.7 x 15.2 x 14.2
Backpressure Limit 230
Certified Power HP (kW) 36.6 (4.9)
Certified RPM4000
Engine TypeCommercial

*Length is PTO to recoil cover. Width is fuel tank to muffler. Height is from mounting surface to top of muffler.

 

1 Power (hp) and Torque (ft lbs) specifications for Kohler general purpose engines are rated pursuant to Society of Automotive Engineers (SAE) J1940 based on gross output testing performed according to SAE J1995 without the air cleaner and muffler. Actual engine power and torque are lower and affected by accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed, ambient operating conditions (temperature, humidity and altitude) and other factors. This J1940 / J1995 rating provides consistent measurement to customers who may want to control the intake and exhaust features of the engine. For more information, contact Kohler Co. Engine Engineering Department. Kohler Co. reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligation.


2 Inches of H20 @ 3600 RPM WOT


3 J1995 power and torque certified by 3rd Party Witness

Shopping Cart
Your cart is empty.
_____________________
 
    
              
           MORE INFO
       ON BRIGGS ENGINE
 
_____________________