Description
627cc Briggs Vanguard OHV
Briggs and Stratton Standby Generator Replacement Engine
- LP/NG Setup
- Tapered Shaft
- No Keyway
- No Tank
- No Muffler
- 12 Volt Electric Start
- Cast Iron Sleeves
- Model 389575-0001
- 90 LBS
389575-0001-E1
Engine Specifications
Engine Fuel | Gaseous |
Configuration | Vertical |
Cylinders | Two |
SKU | 389575-0001-E1 |
Air Cleaner | AIR CLEANER, PAPER ELEMENT (UL |
Air Cleaner Cover | AIR CLNR COV COL 290 - SATIN B |
Bearings | BEARINGS, STEEL BACKED ALUM MA |
Blower Housing | NON-DUCTED AIR FLOW |
Bore Type | Sleevebo |
Bore Size | 2.970 |
Stroke | 2.750 |
Casing Clamps | CASING CLAMP & SCREW, WITHOUT |
Cylinder Head | CYLINDER, TWIN W/C.I.SLEEVE |
Deflectors | DEFLECTORS, WITHOUT |
Dipsticks | DIPSTICK, IN CRANKCAS |
Oil Drain | OIL DRAIN, TRI-DRAI |
Flywheel | FLYWHEEL, HVY EQUIP FOR ELE ST & NON-ALT |
Fuel System | FUEL SYSTEM, WITHOUT FUE |
Exhaust | MUFFLER, WITHOUT |
Spark Plug | SPARK PLUG, RESISTOR |
Starting System | STARTER, 12 VOLT INDUSTRIAL |
Technical Specifications
Model Series | 3895 |
Displacement | 627 |
Oil Capacity | 48 oz (1.4 l) |
Valve Configuration | OHV |
Flywheel Torque | 125 lb/ft (169.5 Nm) |
Governor Arm Torque | 115 lb/in (13.0 Nm) |
Carb Mount | 65 lb/in (7.5 Nm) |
Plug Gap | 0.03 in (0.75 mm) |
Intake Valve | .004-.006 in (.10-.15 mm) |
Exhaust Valve | .004-.006 in (.10-.15 mm) |
Idle Speed | 1750 |
Air Gap | .008-.012 in (.20-.30 mm) |
Flywheel Puller Part | 19203 |
Flywheel Holder Part | 19433 |
Connecting Rod Torque | 115 lb/in (13.0 Nm) |
Sump Torque | 150 lb/in (17.0 Nm) |
Head Torque | 165 lb/in (18.5 Nm) |
Crankshaft Specifications
Service Part Number | 846652 |
PTO Type | Tapered |
Woodruff Key(s) | - |
Square PTO Key #1 | - |
PTO Keyway #1 (mm) | - |
Square PTO Key #2 | - |
PTO Keyway #2 (mm) | - |
PTO Threads | 0.313-24 UNF |
PTO Shaft Diameter (in) | 1.193 |
PTO Shaft Diameter (mm) | 30.3 |
PTO Shaft Length (in) | 3.425 |
PTO Shaft Length (mm) | 87 |